Worksaver SG-26A

Double tap to zoom

Maneuverable - goes anywhere a tractor can; gets into tight places.
Increased productivity via it's unique cutting wheel design.
Cutting wheel design provides a smoother cutting action.
Easy to operate - hydraulic controls allow easy operation from the tractor seat using existing tractor hydraulic controls.
Durable carbide-tipped cutting teeth are economical and easy to replace.
Harden bushings used in major pivot points for increased reliability.
Grease zerks provided at major pivot points for extended service life.
SureFoot stabilizer bar provides secure footing during operation.
Rubber deflector helps control chips and debris during grinding.
Parking stand for easy storage.
Two pair of remote hydraulic outlets are required on the tractor to operate the stump grinder.
SG-26 designed for tractors 22 -50 PTO HP; SG-36 designed for tractors 45-100 PTO HP.
Standard pressure relief valve for even control of cutting feed rate.

Stump Grinder Specifications
	SG-26A
Hitch	Cat. I
Overall Estimated Length (in/cm)	75 / 191
Drive System Protection	Slip Clutch
Gearbox Rating/Ratio	60 HP / 1:1.5
Cutting Wheel Construction	Welded 2-piece Laminated Steel
Cutting Wheel Thickness (in/cm)	3/4 / 1.91
Cutting Wheel Diameter (in/cm)	26 /66
Cutting Wheel Speed	810 RPM
@ 540 PTO RPM	5,515 ft. / min.
Number of Teeth	33
Cutting Teeth Construction	Carbide Steel Bolt-In
Cut Height Above Ground (in/cm)	18 / 46
Cut Depth Below Ground (in/cm)	10 / 25
Maximum Horizontal Cut (in/cm)	28 / 71
Swing Arc	45°
Minimum Power / Flow Required	22-PTO HP
Maximum Power / Flow	50-PTO HP
Driveline	PTO / Series 5
PTO Speed	540 RPM
Weight (lbs/kg)	660 / 299
Product No.	812200